QUESTION NO: 61

Which function does a Cisco TCS recording alias perform?

A. It links recorded media to a specified output location.
B. It provides a dialable alias that will trigger a TCS recording workflow.
C. It sends media to Cisco Medianet.
D. It provides an alias for the recorded filename.

 

 

Answer: B

 

---

QUESTION NO: 62

A network engineer is setting up a Cisco TelePresence Content Server. The customer requires live streaming, but does not have a streaming server. Which media should be configured to stream locally from the TelePresence Content Server?

A. QuickTime
B. MPEG-4
C. Flash
D. Windows Media
E. Darwin

 

 

Answer: D

 

---

QUESTION NO: 63

Which codec is most suitable for a video streaming solution?

A. AAC-LD
B. G.729
C. H.264
D. G.711

 

 

Answer: C

 

---

QUESTION NO: 64

How does a Cisco TCS process incoming video calls?

A. Recording Alias > Template > Media Server Configuration
B. Recording Alias > Media Server Configuration > Template
C. Recording Alias > Media Server Configuration > H.323 > Template
D. Recording Alias > Workflow > Template > Media Server Configuration

 

Answer: A

 

---

QUESTION NO: 65

A customer wants to record Cisco TelePresence conferences with the ability to alter the video format and add captions. Which two products are recommended to accomplish this goal? (Choose two.)

A. Show and Share
B. Digital Media Manager
C. Interactive Experience Manager
D. Media Experience Engine
E. TelePresence Content Server

 

 

Answer: D,E

 

---

QUESTION NO: 66

Which three features are supported by the Cisco Video Surveillance Encoding Server? (Choose three.)

A. IP and analog cameras
B. MPEG-2 and MPEG-4 encoding
C. archiving
D. motion detection
E. clustering
F. virtual matrix

 

Answer: A,C,D

 

---

QUESTION NO: 67

Which three products are compatible with Digital Media Manager? (Choose three.)

A. Media Delivery Engine
B. Interactive Experience Client
C. Show and Share
D. Cast
E. Digital Signs
F. Stadium Vision Director

 

Answer: C,D,E

 

---

QUESTION NO: 68

A customer has a data and VoIP converged network and would like to add video to this network. Which two key QoS elements should be included in the new network design? (Choose two.)

A. Configure bandwidth management features to smooth bursty traffic and mitigate end-to-end congestion.
B. Assign a high priority to transactional traffic to maintain quality of business traffic.
C. Keep video traffic on the low latency queue and move voice traffic to a lower-priority queue.
D. Apply bandwidth control features that will guarantee bandwidth for the maximum possible amount of video traffic.
E. Assign both video and voice traffic to use the highest-priority queue.

 

 

Answer: A,D

 

---

QUESTION NO: 69

A network engineer wants to quickly view any issues that may exist for a newly deployed Cisco TelePresence SX20 codec. To which location in the codec web GUI should the engineer navigate to find this information?

A. Diagnostics > Alerts
B. Diagnostics > Troubleshooting
C. Configuration > System Status
D. Configuration > Security

 

Answer: B

 

---

QUESTION NO: 70

An engineer wants to know if there is a way to determine the optical zoom of a Cisco TelePresence SX20 remotely. Which two methods will retrieve this information? (Choose two.)

A. From the CLI, run xstatus.
B. From the CLI, run xconfig.
C. From the web GUI, choose Configuration > System Status > Camera.
D. From the web GUI, choose Configuration> Camera > Status.
E. From CLI, run xcommand camera.

 

 

Answer: A,C

 

---

QUESTION NO: 71

A desktop video endpoint is needed that can support a PrecisionHD camera design and a built-in display, and is Bluetooth-ready and multisite-capable. Which desktop endpoint supports all of these requirements?

A. SX20
B. EX60
C. SX80
D. EX90

 

 

Answer: D

 

---

QUESTION NO: 72

An immersive video room requires acoustic remediation because there is noticeable reverb present. What type of acoustic paneling does Cisco recommend to provide remediation?

A. NRC rating greater than 0.75
B. NRC rating greater than 0.5
C. NRC rating less than 0.75
D. NRC rating less than 0.5

 

 

Answer: A

 

---

QUESTION NO: 73

An engineer is configuring a Cisco TelePresence System endpoint for use with a maximum of six people in the room. Which table type should be configured when setting up cameras where two participants directly face the endpoint display?

A. short racetrack
B. long racetrack
C. short rectangle
D. long rectangle

 

 

Answer: A

---

QUESTION NO: 74

Which two methods can be used to set the default call protocol of a Cisco TelePresence endpoint running TelePresence codec firmware? (Choose two.)

A. Use the GUI and set System > H.323 > Settings > Default Call Protocol > H.323.
B. Use the CLI command xConfiguration Conference 1 DefaultCall Protocol: H323.
C. Use the CLI command Conference Default Protocol: H323.
D. Use the CLI command Default Protocol: H323.
E. Use the GUI and set Configuration > System Configuration > Conference > DefaultCall > H.323.

 

Answer: B,E

 

---

QUESTION NO: 75

On a Cisco C-Series codec, where would a technician go to configure the wallpaper?

A. Configuration > User Administration
B. Configuration > Personalization
C. Configuration > Peripherals
D. Configuration > System Configuration

 

 

Answer: B

 

---

QUESTION NO: 76

A new Cisco TelePresence MCU 5300 is being installed. The customer requested a static IP address to be configured on this device. Which two methods address this request? (Choose two.)

A. From the MCU console, issue the command set static ip-address netmask default-gateway.
B. From the MCU console, issue the command xconfigure interface:1 static ip-address netmask.
C. From the MCU console, issue the command static A ip-address netmask default-gateway.
D. From the web interface, use the Network > Port A menu options.
E. From the web interface, use the Settings > Interface menu options.

 

Answer: C,D

 

---

QUESTION NO: 77

To which Ethernet port on a Cisco TelePresence System (500/1x00/1300/3xx0) endpoint would a technician need to connect to manually assign a static IP address for first-time setup?

A. IP phone port
B. network port
C. camera port
D. auxiliary network port

 

Answer: D

 

---

QUESTION NO: 78

A user is currently on a Cisco TelePresence call using a Touch 8 device and would like to change the local screen layout so that the active speaker is in full screen and the other participants are smaller within the picture. Which layout option should the user choose?

A. Prominent
B. Overlay
C. PiP
D. FullScreen

 

 

Answer: B

---

QUESTION NO: 79

The user of a Cisco TelePresence MX300 wants to control the far-end camera of any video conference participant. Which control device and function is used to control the far-end camera?

A. Navigate using the TRC5 Remote Control arrow keys.
B. Tap on the image of one of the participants using touch control.
C. Use the Touch Control Conference functions.
D. Use the TRC5 Remote Control home key.

 

Answer: B

 

---

QUESTION NO: 80

Refer to the exhibit.

A company would like to add additional multipoint features to their video infrastructure. Which feature is the video administrator attempting to configure in this exhibit?

A. multisite feature to allow third-party multipoint conferences
B. multipoint scheduled conferences using conference factory
C. multiway feature to allow on-demand conferences
D. multisite feature to allow scheduled conferences

 

 

Answer: C