Topic 5, Mix Questions

QUESTION NO: 21

When scheduling a multipoint conference, which three devices are required for the conference to be scheduled and completed successfully? (Choose three.)

A. Cisco Unified Communications Manager
B. multipoint control unit
C. video conferencing endpoints
D. Cisco Unity Connection
E. Cisco Unified IM and Presence

 

 

Answer: A,B,C

 

---

QUESTION NO: 22

Which of these is the core component of the Cisco Video Surveillance product suite that handles recording and serving of video feeds?

A. Video Communications Server
B. Cisco IP camera
C. Cisco Video Surveillance Operations Manager
D. Cisco Video Surveillance Media Server

 

 

Answer: D

 

---

QUESTION NO: 23

Which Cisco Video Surveillance product contains the Cisco Video Surveillance Encoding Server?

A. Video Communications Server
B. Cisco Video Surveillance Operations Manager
C. Cisco Video Surveillance Media Server
D. Cisco Video Surveillance Transcoding and Encoding Server
E. Cisco Video Surveillance Virtual Matrix

 

 

Answer: B

 

---

QUESTION NO: 24

Cisco Video Surveillance Video Encoder cards perform which function?

A. the ability to use existing analog equipment with an IP-enabled video surveillance system
B. the ability to convert low-resolution video to high-definition video for video surveillance
C. the ability to stream digital media to digital media in an IP-enabled video recording environment
D. the ability to encrypt raw video signals to secure video signals

Which configuration item shown in the exhibit should be used to assign the internal and external video communication server address for this group of users?

 

Answer: A

 

---

QUESTION NO: 25

Which two issues does utilizing an IP network storage solution for IP video surveillance help overcome? (Choose two.)

A. analog to IP conversion
B. large, expandable storage space
C. physical security
D. scalability
E. faster bit rate for storage

 

 

Answer: B,D

 

---

QUESTION NO: 26

Which Cisco Video Surveillance device is responsible for providing video streams to monitors after the respective layouts and views are received by the monitors?

A. Cisco IP Video Surveillance Operations Manager
B. Cisco IP Video Surveillance Virtual Matrix Viewer
C. Cisco Video Surveillance Manager
D. Cisco Video Surveillance Media Server

 

Answer: D

 

---

QUESTION NO: 27

Which of these involves combining visual elements from separate sources into a single image?

A. interlacing
B. compositing
C. video conferencing
D. interleaving

 

Answer: B

 

---

QUESTION NO: 28

Which two of these are considered to be provisioning and scheduling management tools in a Cisco TelePresence environment? (Choose two.)

A. Cisco TelePresence Manager
B. Cisco Video Surveillance Operations Manager
C. Cisco TelePresence Management Suite
D. Cisco TelePresence Multipoint Control Unit
E. Cisco Video Surveillance Management Server

 

 

Answer: A,C

 

---

QUESTION NO: 29

Refer to the exhibit.

You have just finished installing a 65-inch dual profile system in a multipurpose room. After powering up the entire system, only one display is used. Using the information in the exhibit, why is the second display not displaying anything from the system?

 

A. The Cisco TelePresence profile systems do not support dual display.
B. The display is not powered on.
C. The dual display option key has not been input into the codec.
D. The codec has the appropriate option keys installed, so either the display is not cabled correctly, the codec is configured incorrectly, or there is no input being sent to the display.

 

Answer: D

 

---

QUESTION NO: 30

Threat monitoring in physical access security can be based upon which three of these? (Choose three.)

A. doors
B. badges
C. age
D. weather
E. height
F. fingerprints

 

 

Answer: A,B,F

 

---

QUESTION NO: 31

When connecting to a pan-tilt-zoom camera to a C-Series codec, what type of cable must be used for camera control?

A. an Ethernet crossover cable (RJ45-to-RJ45)
B. an Ethernet cable (RJ45-to-RJ45)
C. a serial cable (DB25-to-DB9)
D. a VISCA cable (DB9-to-RJ45)

 

 

Answer: D

 

---

QUESTION NO: 32

Which statement is true about the Cisco TelePresence System 500-32 system regarding the HVAC needs for the room where it is installed?

A. The system does not require any additional requirements above the normal HVAC requirements for the room.
B. You must supply additional cooling requirements for the room.
C. You must supply a room that has energy-efficient lighting to reduce the temperature of the room.
D. The temperature of the room will be 10 to 20 degrees warmer than the rest of the building.

 

 

Answer: A

 

---

QUESTION NO: 33

What is the optimum distance for a person sitting using the Cisco TelePresence System 500?

A. The camera can adjust automatically
B. 0.5 meters and 0.75 meters (1.5 and 2.5 feet)
C. 1.2 meters and 1.8 meters (4 and 6 feet)
D. 3.0 and 5.0 meters (10 and 15 feet)

 

 

Answer: C

 

---

QUESTION NO: 34

You have installed a C-Series endpoint in an office where DHCP is not supported. At a minimum, which four network items must be configured for the endpoint to be able to register with H.323 on a Cisco TelePresence Video Communication Server located at the external headquarters location? (Choose four.)

A. unique IPv4 address
B. subnet mask
C. default gateway
D. Cisco VCS IPv4 address
E. Active Directory IPv4 address
F. SMTP server IPv4 address

 

Answer: A,B,C,D

 

---

QUESTION NO: 35

Which two additional items can be configured for an endpoint to register with the Cisco TelePresence Video Communication Server for H.323 to function correctly? (Choose two.)

A. unique system ID
B. unique H.323 ID
C. unique DNS entry ID
D. unique E.164 alias
E. unique real-time transport protocol port numbers
F. unique NTP server IPv4 address

 

 

Answer: B,D

 

---

QUESTION NO: 36

Which two additional items must be configured for an endpoint to register manually with the Cisco TelePresence Video Communication Server for the SIP to function correctly? (Choose two.)

A. E.164 alias
B. H.323 ID
C. SIP uniform resource indicator
D. configured SIP registrar and proxy server
E. NTP server IPv4 address
F. unique system ID

 

Answer: C,D

 

---

QUESTION NO: 37

What is the importance of defining option 150 in the DHCP server for Cisco TelePresence endpoints?

A. Option 150 is not important.
B. It is the TFTP server IPv4 address where the video endpoint retrieves its configuration file while booting.
C. It is the IPv4 address of the default gateway for the subnet that the video endpoint is connected to.
D. It is the configured SIP registrar and proxy server.
E. It is the unique NTP server IPv4 address.

 

Answer: B

 

---

QUESTION NO: 38

Which of these needs to be enabled in Cisco Unified Communications Manager in order for the Cisco TelePresence System 500-32 to be able to share a presentation with a Cisco TelePresence System Codec C40 endpoint that is registered to a VCS?

A. Allow iX application media
B. Send send-receive SDP in mid-call invite
C. Allow presentation sharing using BFCP
D. Allow presentation sharing using H.235
E. Deliver conference bridge identifier

 

 

Answer: C

---

QUESTION NO: 39

What is the main difference between a Cisco TelePresence Multipoint Control Unit and a Cisco TelePresence Multipoint Switch?

A. The Cisco TelePresence Multipoint Control Unit is a hardware bridge. The Cisco TelePresence Multipoint Switch is a software bridge.
B. The Cisco TelePresence Multipoint Control Unit is a software bridge for immersive and nonimmersive endpoints. The Cisco TelePresence Multipoint Switch is a hardware bridge for nonimmersive endpoints.
C. The Cisco TelePresence Multipoint Control Unit delivers automatic voice-activated switching. The Cisco TelePresence Multipoint Switch provides active presence.
D. The Cisco TelePresence Multipoint Control Unit has a latency of less than 10 ms, whereas the Cisco TelePresence Multipoint Switch has a latency of 100 ms.

 

Answer: A

 

---

QUESTION NO: 40

When placing a call from Cisco Jabber Video for TelePresence to the Cisco TelePresence System Codec C40, which FECCs are available?

A. Only zoom-in and zoom-out are available.
B. Only left and right are available.
C. Only up and down are available.
D. No FECC is available.
E. Left, right, up, down, zoom-in, and zoom-out are all available.

 

 

Answer: E