نمونه سوالات 065-210 Implementing Cisco Video Network Devices (CIVND)

نمونه سوالات آزمون Implementing Cisco Video Network Devices 210-065

QUESTION NO: 41

Which statement is correct regarding the difference between Multisite and Multiway conferencing?
A. Multisite requires configuration on the endpoint, whereas Multiway requires the Multiway options key to be installed.
B. Multisite requires the presence of a multipoint control unit, whereas Multiway relies on the endpoint conferencing capability.
C. Multisite is used to conference in multiple sites, whereas Multiway is intrasite multipoint conferencing.
D. Multisite requires the Multisite options key to be installed and configured at the endpoint, whereas Multiway requires a Cisco TelePresence Video Communications Server and a centralized multipoint control unit.

Answer: D

QUESTION NO: 42

Refer to the exhibit.

Which two of these can cause the phone status error icon that is shown in the exhibit? (Choose two)

A. The Cisco Unified Communications Manager IM and Presence Service is not available.
B. The username and password in Cisco Jabber phone services are misconfigured.
C. The Cisco Jabber initial audio and video settings need to be set.
D. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified Communications Manager.
E. The Cisco Jabber does not have the correct phone button template and hence cannot register
to the Cisco Unified Communications Manager.
F. The called user presence status is unknown.

Answer: B,D

QUESTION NO: 43

Which two of these can cause registration problems for a Cisco TelePresence Codec C40 endpoint running in H.323 mode? (Choose two.)

A. The IP default gateway address is incorrect for the endpoint.
B. The H.323 license stack is not added to the endpoint.
C. The MAC address for the endpoint has not been added to the Cisco TelePresence VCS.
D. The E.164 H323Alias has not been configured on the endpoint.
E. The URI address has not been configured on the endpoint.

Answer: A,D

QUESTION NO: 44

What is the main difference between Cisco Jabber and Cisco Jabber Video for TelePresence?

A. Cisco Jabber registers to the Cisco Unified Communications Manager, whereas Cisco Jabber Video for TelePresence registers to the VCS.
B. Cisco Jabber Video for TelePresence registers to Cisco Unified Communications Manager, whereas Cisco Jabber registers to the VCS.
C. Cisco Jabber has no video calling capabilities, whereas Cisco Jabber Video for TelePresence has video capabilities.
D. Cisco Jabber has no presence capabilities, whereas Cisco Jabber Video for TelePresence has presence capabilities.

E. There is no difference between Cisco Jabber and Cisco Jabber Video for TelePresence. They should not coexist in the same network.

Answer: A

QUESTION NO: 45

In this item, you will need to use all information presented to you to successfully answer the question.

The Cisco Telepresence Codec C90 is unable to call the Cisco IP Video Phone. Assuming that the calling search space has been configured correctly, which of the these can cause this issue?

A. The Cisco Telepresence Codec C90 can only be registered to a Cisco Telepresence Video Communication Server.
B. A multipoint control unit is required in order for the call to work.
C. The Cisco Telepresence Codec C90 can only be registered as a SIP endpoint to Cisco Unified Communications Manager. H.323 is not supported.
D. URI dialing has not been configured on Cisco Unified Communications Manager.
E. The Cisco Telepresence Codec C90 Profile 1 > CallSetupMode must be configured as a gateway since Cisco Unified Communications Manager does not have a gatekeeper functionality.
F. The Cisco Telepresence Codec C90 is not registered as a SIP endpoint on Cisco Unified Communications Manager. The Cisco Telepresence Codec C90 needs to be registered as both SIP and H.323.

Answer: E

QUESTION NO: 46

Refer to the exhibit.

What can be deduced from the log shown in the exhibit, which was taken from a Cisco TelePresence Codec C60?

A. A direct call to 52902511 is being made.
B. A Multiway call to multiway221@osl147.local is being made.
C. No calls are being attempted by the endpoint.
D. A BFCP call is being initiated.
E. The endpoint is receiving a call from the VCS.

Answer: B

QUESTION NO: 47

Refer to the exhibit.

Under which tab can the registration status for the endpoint be found?

A. Diagnostics
B. Configuration
C. Call Control
D. Maintenance

Answer: A

QUESTION NO: 48

Which two of these are required in order to complete the password recovery of a Cisco TelePresence System endpoint? (Choose two.)

A. must have FTP enabled on the endpoint
B. must have SSH enabled on the endpoint
C. must have the security question answer for the endpoint
D. must be in the same room as the main display
E. must have SFTP enabled on the endpoint
F. must call Cisco TAC for the security code

Answer: B,D

QUESTION NO: 49

In this item, you will need to use all information presented to you to successfully answer the question.

Refer to the exhibits. An administrator needs to perform a factory reset on a C-Series endpoint. What are two valid ways to accomplish this task? (Choose two.)

A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
E. Exhibit E

Answer: C,D

QUESTION NO: 50

You have been informed from the field that a new Cisco TelePresence video endpoint has been deployed with an IPv4 address of 172.28.254.45. You need to check for connectivity from the Cisco Unified Communications Manager server. Which command should be entered to check for network connectivity?

A. utils network traceroute newsystem.domain254.local
B. utils network ping 172.28.254.45
C. ping 172.28.254.45
D. traceroute 172.28.255.255
E. utils network host cucm.osl147.local

Answer: B

QUESTION NO: 51

Which CLI command can be used to reset the Cisco TelePresence System 500-32 personal video system to a factory condition?

A. utils factory reset 2
B. utils system factory init
C. xcommand defaultvalues set level: 2
D. xconfiguration default factory
E. utils reset factory
F. xcommand SystemUnit FactoryReset

Answer: B

QUESTION NO: 52

In this item, you will need to use all information presented to you to successfully answer the question.

The C-Series endpoint (codec) does not register with the Video Communication Server that is located in a different network. Based on the exhibits, what could be causing the issue?

A. The subnet mask on the codec is incorrect.
B. The ip address of the codec is incorrect.
C. The interface that the codec is in is in the wrong VLAN.
D. The codec did not receive a DHCP address from the DHCP server.

Answer: A

Explanation:

The subnet mask configured on the codec is 255.255.255.128, when it should be 255.255.255.0.

QUESTION NO: 53

Which three of these are functions of the Cisco TelePresence Management Suite? (Choose three.)

A. automatic software update and release keys
B. intelligent call routing engine
C. provisioning a Cisco TelePresence System endpoint
D. tracing SIP and H.323 calls
E. managing phonebooks for endpoints that are registered to the Cisco Unified Cisco Unified Communications Manager
F. rebooting endpoints that are registered to the Cisco TelePresence Video Communications Server

Answer: A,B,F

QUESTION NO: 54

Refer to the exhibit.

Which system tab can be used to add video infrastructure devices and endpoints?

A. Navigator
B. System Overview
C. Configuration Templates
D. Provisioning
E. Administrative Tools

Answer: A

QUESTION NO: 55

Which two layout or switching modes are supported with the Cisco TelePresence Multipoint Switch? (Choose two.)

A. enhanced continuous presence
B. active speaker switching
C. continuous presence
D. speaker switching
E. room switching
F. active continuous presence

Answer: D,E

QUESTION NO: 56

Which Cisco TelePresence Multipoint Control Unit Layout view mode gives prominence to one conference participant over the other conference participants while still allowing conference participants to view multiple participants at the same time?

A. enhanced continuous presence
B. active speaker
C. continuous presence
D. room switching
E. speaker switching

Answer: A

QUESTION NO: 57

An important Cisco TelePresence video multipoint call is in progress and you are getting complaints of pixilation of the video and poor audio quality on one of the involved systems. Which page would be a good place to start for troubleshooting the issue on the affected endpoint?

A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D

Answer: A

QUESTION NO: 58

Which two of these support an ad-hoc conference call? (Choose two.)

A. Cisco TelePresence Multiway with Cisco TelePresence Multipoint Control Unit and Cisco TelePresence Video Communications Server
B. using the Cisco TelePresence Management Suite Scheduler to schedule a conference call to start in 5 minutes
C. using the Booking tab in the Cisco TelePresence Management Suite to configure a new conference
D. using the tab Administrative Tools > Configuration > Conference Settings in the Cisco TelePresence Management Suite
E. pressing the conference button on a Cisco Unified IP Phone 8941 to conference in a third call